D2 Fixed Blade Knife – Pine Cone Resin Handle & Leather Sheath

D2 Fixed Blade Knife with Pine Cone Resin Handle

This D2 Fixed Blade Knife combines a full tang D2 steel blade with a distinctive pine cone resin handle and an included leather sheath. Measuring 9 inches overall, it features a 4.5-inch handle and a handmade fixed-blade construction.

The blade is made from D2 tool steel and vacuum tempered to approximately 59 HRC. D2 is a high-carbon, high-chromium tool steel valued in knives and other cutting tools for its hardness, edge retention, and wear resistance.

D2 Steel Blade – 59 HRC

The D2 steel blade is the centerpiece of this fixed-blade design. It is vacuum tempered to approximately 59 HRC, providing the hardness associated with properly heat-treated D2 steel knives.

D2 is commonly described as a high-chromium tool steel with a combination of hardness, edge retention, and wear resistance. These characteristics have made it a widely used steel for knives and other cutting tools.

Proper heat treatment is especially important with D2 steel, helping balance its hardness with practical cutting performance.

Edge Retention & Wear Resistance

One of the reasons D2 steel knives are popular is the steel's combination of edge retention and wear resistance.

Good wear resistance helps slow abrasive wear during normal cutting, while edge retention refers to the blade's ability to maintain its cutting edge through use.

D2's composition as a high-carbon, high-chromium tool steel contributes to these characteristics.

Like any knife steel, however, actual performance also depends on heat treatment, blade geometry, sharpening, maintenance, and how the knife is used.

Full Tang Construction

This D2 Fixed Blade Knife features full tang construction, meaning the blade steel continues through the handle rather than ending near the front of the grip.

The knife measures 9 inches overall, with a 4.5-inch handle.

Full tang construction pairs the D2 steel blade with the handle across the length of the grip, creating the traditional construction found on many handmade fixed-blade cutting tools.

Pine Cone Resin Handle

The 4.5-inch handle is made from pine cone resin, giving this knife a distinctive appearance compared with conventional wood or synthetic handles.

The embedded pine cone material creates natural-looking shapes and patterns within the resin. Pattern placement and visual details can vary between individual handles.

This variation gives each knife its own character while creating a strong visual contrast with the D2 steel blade.

D2 Fixed Blade Knife Specifications

Knife Type: D2 Fixed Blade Knife
Overall Length: 9 inches
Handle Length: 4.5 inches
Blade Material: D2 Tool Steel
Steel Type: High-Carbon, High-Chromium Tool Steel
Hardness: Approximately 59 HRC
Heat Treatment: Vacuum Tempered
Handle Material: Pine Cone Resin
Construction: Full Tang
Sheath: Leather Sheath Included

Leather Sheath Included

A leather sheath is included with this D2 Fixed Blade Knife, providing covered storage for the blade when the knife is not in use.

Make sure the blade and sheath are dry before storage. Leather can retain moisture, so a damp knife should not be left inside its sheath for extended periods.

Caring for D2 Steel Knives

Although D2 is a high-chromium tool steel, proper maintenance is still recommended.

Clean the D2 steel blade after use and dry it thoroughly before storage. Periodically applying a light coating of suitable blade oil can provide additional protection against moisture.

Good maintenance helps preserve the blade's finish, edge, and overall condition while allowing you to benefit from the edge retention and wear resistance associated with D2 steel.

Frequently Asked Questions

What steel is used in this D2 Fixed Blade Knife?

The blade is made from D2 tool steel and vacuum tempered to approximately 59 HRC. D2 is a high-carbon, high-chromium tool steel commonly used for knives and cutting tools where hardness, edge retention, and wear resistance are desirable characteristics.

Is this D2 knife full tang?

Yes. This knife has full tang construction. The complete knife measures 9 inches overall and has a 4.5-inch pine cone resin handle.

Does the knife come with a leather sheath?

Yes. A leather sheath is included with the knife. Keep both the D2 steel blade and leather sheath completely dry before storing the knife.